by Do you know how to remove flat back earrings? Removing flat-back earrings can be tough. The best way to remove them without taking a chunk of skin off with it is to use the “tweezers position”. To do this, place your thumb and index finger on either side of the hook of the earring, then pinch together to push down gently.
Next, assess where you are pinching; if you are not pinching at the hook but on a jaw near the hook, rotate your hand to apply pressure in this area. It may take a few tries to get the positioning correct.
Once you have found where it is most comfortable, push down again and pull up as hard as you can. If they have any type of barbell hidden underneath them.
Today we want to share with you different methods for removing flat-back earrings that are not easily removed by twisting. If you struggle with removing them, use our handy guide below!
Removing flat-back earrings is not as easy as it sounds. Sure, there are countless ways how to remove them — but how many of these methods work? All of these methods may have a certain success percentage of getting your flat back earring off your ears.
This article will cover how to remove flat-back earrings properly.
Table of Contents
Why do we need to remove flat-back earrings?
In the past, flat-back earrings were the most popular style for many women. This probably makes sense, since they were easy to wear and you didn’t have to worry about someone else’s hair catching on them. Many women also liked them because they gave a “larger” look to their faces. However, times have changed.
Demand has shifted, although this isn’t being reflected in the sales of earrings straight from the factories in China or made in Thailand out of cheap materials. They are still being made en masse and being exported to the US, UK, Canada, and Australia.
In addition, you need to know how to remove flat-back earrings when you lose one. The simple reason is that if it swings back and forth on your earlobe it could cause damage to your skin.
How can you prevent the loss of flat-back earrings?
If you want to prevent the loss of a flat back earring here are a few things that will help. First, keep the earring from falling off on its own by keeping it in place. Try to put the earring back if you lose it immediately.
Second, keep in mind that sometimes people accidentally lose their earrings. In addition to this, many times people forget their earrings at home!
How to remove flat-back earrings step by step?
- Remove pliers
- Remove tweezers
- Remove metal earring backs and loops
- Heat the metal back with tweezers to soften it
- Cover the earring back with your thumb or fingers and pull it outwards
- Hold the earring against your ear with the loop end on the bottom of the ear
- Bend the tip of the hook so it is pointing backward and put it back into place
- Open your fingers and push down gently to put them back in place
- Apply some pressure to the hook area to hold it in place, if necessary.
- Rotate your hand until you have found a comfortable position to push down and pull up as hard as you can without causing pain/cutting (flesh/skin).
- If the earring does not start to come out, gently pry off the bottom of the earring
- If you can no longer grab the top part of a looped earring, push it back down with your fingers
- Pinch together and rotate to pull outwards – repeat as many times as necessary for removal.
- Pull outwards again until it comes free or prying off does not cause pain or injury to the skin
- If you still cannot remove the earring, use pliers to bend the point closer to the ear and push it back in place
- If you can no longer pry off the bottom of the earring, use tweezers to reach in and grab it.
- If this does not work use pliers to bend the point even more until you can get a hold of the top part.
Another post: How to clean raycon earbuds? The best 4 ways are described properly
What is the best remover from flat-back earrings?
The most successful way to get flat-back earrings off your ears is by creating leverage.
The best way to remove flat back earrings is by using the “tweezers position”. To do this, place your thumb and index finger on either side of the hook of the earring, then pinch together to push down gently.
Next, assess where you are pinching; if you are not pinching at the hook but on a jaw near the hook, rotate your hand to apply pressure in this area. It may take a few tries to get the positioning correct.
Once you have found where it is most comfortable, push down again and pull up as hard as you can. You may also choose to use a pair of pliers or a pair of tweezers for extra leverage if needed.
Why flat back earrings won’t unscrew?
This is another problem that you might encounter with your flat-back earrings. If you are using a pair of pliers or tweezers, you must be careful not to twist the earring. This is because the unscrewing motion has two sides to it – one side is what releases it from the skin and the other side is what unscrews it out of its backing.
Twisting the earring could make this process more difficult and painful than necessary. If you have these types of issues, then use the “tweezers position” to remove them.
Once you’ve removed the earring from your earlobe, be sure to check both ears for any pieces left behind. After you’ve finished removing it, be sure to clean the area thoroughly with soap and water to prevent any more buildup.
How to easily remove flat-back earrings on Reddit?
- Use tweezers to pinch the earring, instead of twisting it.
- Pop the earlobe out with your thumb and finger, instead of a pair of pliers.
- Use pliers if needed to bend the point closer towards the ear and push it back in place.
- Use tweezers to grab the bottom of the earring.
- Use your fingers and thumb to gently twist an earring out of its backing.
- Hold the loop end against your ear with the tip pointing down and use tweezers to bend it back in place
- Push down gently on the top part of a looped earring until you have found a comfortable position to push down and pull up as hard as you can without causing pain/cutting (flesh/skin).
- If you cannot remove the earring from your ear, use pliers to bend the point even more until you can get a hold of it.
How to remove earrings without pliers?
The most popular remedy is to use a pair of tweezers, yet they can be dangerous and painful if used improperly or with little grip or strength. Other types of tweezers are recommended by professionals, such as those made of silver-coated Stainless steel. They are great for removing earrings!
The best way to remove earrings without pliers is by using the “tweezers position”. To do this, place your thumb and index finger on either side of the hook of the earring, then pinch together to push down gently. After that, assess where you are pinching; if you are not pinching at the hook but on a jaw near the hook, rotate your hand to apply pressure in this area. It may take a few tries to get it right.
How to remove flat back cartilage earrings?
1: Twist the earring with your fingers.
2: Remove the earring from your earlobe.
3: Clean the area thoroughly to prevent any more buildup.
4: Apply oil to your earlobe, and sit in a steamy shower for 30 seconds. Afterward, pat dry with a soft towel and apply some oil over any cuts that you may have made during this process.
5: Apply some pressure to the cartilage for about 5 minutes, and push out gently. It may take a few times until you can flick it out with your finger.
6: If this does not work, you can use tweezers to grab hold of the back part of the earring. You may need an extra pair for this method, though.
7: If all else fails, you can cut off any hooks that are still stuck on your skin.
How to easily remove stud earrings?
1: Pinch the back part of the earring between your thumb and index finger.
2: Gently twist your fingers from either side of the hook until you feel resistance. Then, check to see if the hooks have been released from the backing.
3: If this does not work, or if you are uncomfortable doing so, use pliers with a sharp point to bend and unseat any hooks that are still stuck in place.
Frequently asked some questions about how to remove flat-back earrings
How to remove post earring?
To easily remove earrings, all you need to do is pinch the back part of them between your thumb and index finger.
When you are pinching, you need to find the right point. Do not push down on either side. When you are pinching on that right point, it might feel uncomfortable at first, but that is normal. Keep going until you achieved a comfortable position for the pinching and twisting motion so it does not cause pain or injury to your skin.
How do you unscrew a flat-back earring?
To unscrew flat-back earrings, you will need a pair of pliers or your fingers. If you have a pair of pliers, use them to gently bend the back part of the earring until you can get a hold of it with either your fingernail or thumb. If you have no pliers, use your fingers to bend the part of the earring that is shaped like a nub until you can get a hold of it with your nail or thumb.
Are flat-back earrings hard to remove?
Once you have placed the earring in your ear and twisted it downwards, all you need to do is pinch the back part of the earring between your thumb and index finger. Do not twist it upwards and force it through the skin.
If you do this, you will most likely cause injury to your skin or bleeding. Work with a gentle motion and find a comfortable position where you can pinch and twist at the same time without causing pain or injury to your skin.
video credit: The Piercing Outlet
Conclusion of how to remove flat back earrings:
After reading through this post, you should have a better idea of how to remove earrings without pliers or pliers. This post has also revealed that flat-back earrings are difficult to remove as they are not designed with the same structures as other types of earrings.
With so many circumstances, from swimming to showering to events and even sleeping, you still need to be cautious when wearing these types of earrings.
