There are many people who want to know how to clean grease trap on traeger?
The Traeger grill is a gas-powered machine that creates temperatures of around 700-900°F. You can use it to grill everything from steaks to chicken, and depending on the model you get, you can even build in some self-seasoning elements for vegetables.
The Traeger grease trap is an integral part of your smoking process; it’s the place where your smoke meets with the kitchen. But, it can get a bit messy, or even downright disgusting.
The grease trap is a piece of equipment placed under your home’s kitchen sink that collects grease, grease stains, and other food residues. If you have a Traeger pellet grill, chances are you’ve heard of their famous “no fat dripping” feature.
It consists of a grease trap that captures all the fat dripping down from the meat as it roasts or grills. Cleaning the grease trap is optional but highly recommended. If there’s any way you can do it yourself, it’s worth considering poking around some of the instructions found on the internet to find out how to clean this unit.
Table of Contents
Why need to clean the grease trap on Traeger?
The Traeger Grate Cleaner is a great product that makes cleaning your Traeger grill easy. If you’re looking for a way to clean the grease trap, then this is the item you need.
The grease trap will also help keep your smoker running smoothly and efficiently so that you can get great-tasting food every time you use it.
You can purchase this product at Walmart for only $4.97, which is an amazing price for such an important item like this one. This cleaner will allow you to clean all of the hard-to-reach areas of your Traeger grill, meaning that it will be easier than ever before for you to make delicious meals using your smoker.
The main reason to clean the trap is to prevent the build-up of grease, oil, and other debris. Traps collect liquids or food that has been cooked over the fire, as well as grease that has fallen off meat while it was cooking.

What is needed to clean the grease trap on Traeger?
Before you start, make sure you have all the right equipment and supplies. If you’re using a grease trap on a Traeger pellet smoker, here’s what you’ll need:
- An oil-filled grease trap
- A bucket with a swivel handle for easy access
- A cleaning brush or scraper
- A screwdriver or pliers
What is the easiest way to clean the grease trap on Traeger?
The easiest way to clean a Traeger grill’s grease trap is by removing it from the grill and cleaning it with soapy water and a brush. This process can be done by hand or with a hose attachment on an outdoor faucet. You must clean it regularly so that it doesn’t become clogged up with grease and food particles that could cause a fire if not cleaned regularly.
How to clean grease trap on Traeger in 7 steps?
- Remove the back and the side grates by unscrewing them. The grease trap is located under the side lid.
- Lift on the two tabs on the back of the trap and pull them out so they’re not pushing into the grill. Then, lift it to remove it from under the lid, exposing all of its parts.
- Turn the trap over and remove it from under the lid.
- Clean out all of the greases from around the drain and debris from around its frame. Use a rag or sponge and soapy water to clean that area up, then dry everything off with a paper towel or clean rag. Then turn the trap back over so that your grill’s grease-catching tray is facing away from you.
- Remove the grease trap from the grill.
- Put a bucket of soapy water in front of the grill, then place the trap on top and let it stand for about 20 minutes. This will soak up any extra grease around its frame and it’ll help keep it clean and working properly.
- Remove the trap from the bucket and give it a thorough scrub anywhere you find food debris, bits of meat, or other debris caught in its funnel.
Another post: How to clean a sage coffee machine? The Best 7 Steps Properly Given
How to easily clean the grease trap on Traeger 575?
- Open the grill
- Disconnect the heating unit from the base
- Gently pull out the grease trap, but don’t disconnect the tube. Put a little bit of liquid soap in a bucket and put it next to the grill cleaning tool and a garden hose (to let flow). Fill the swivel bucket with soapy water.
- Place the funnel in the hose p/nˆ8, turn it on and start to clean; push down on it gently to remove all gunk that can be removed.
- Spray some soap in the grease trap.
- Let it sit for 20 minutes or so, depending on how bad it is.
- If there is no water coming out of the grill, replace it with a hose attached to your faucet and let it run until all the soap is out and clean. Another way is to just spray some liquid soap inside and let it run for a few minutes (no need to fill up the whole grease trap).
- After 10-15 minutes you will notice that the soap is out. Turn off the water supply and remove the hose.
- Gently clean all of the gunk with a spoon or similar kitchen cleaning tool, then put it back in place and connect it to the grill. Do not forget to reconnect the heating unit to its base!
- Replacing front, side, and back grilles without disconnecting wires in between them (just remove 2-3 bolts for each grate).
- Exiting the grill.
- Turn off the power, remove the grease trap and fill it with soapy water for about 20 minutes (can also be done with a garden hose). Re-install to grill, connect the grill to power and reopen the grill.
- Put the oil tray back on, then reinstall all side grills, then close and lock the lid (or close the lid and reconnected its power).
How to properly clean grease trap on Traeger ironwood 885?
- Open the grill.
- Disconnect the heating unit from the base.
- Gently pull out the grease trap, but don’t disconnect the tube. Put a little bit of liquid soap in a bucket and put it next to your grill cleaning tool and a garden hose (to let flow). Fill the swivel bucket with soapy water. Place the funnel in the hose p/nˆ8, turn it on and start to clean; push down on it gently to remove all gunk that can be removed.
- Spray some soap in the grease trap. Let it sit for 20 minutes or so, depending on how bad it is. If there is no water coming out of the grill, replace it with a hose attached to your faucet and let it run until all the soap is out and clean. Another way is to just spray some liquid soap inside and let it run for a few minutes (no need to fill up the whole grease trap). After 10-15 minutes you will notice that the soap is out.
- Turn off the water supply and remove the hose.
- Gently clean all of the gunk with a spoon or similar kitchen cleaning tool, then put it back in place and connect it to the grill. Do not forget to reconnect the heating unit to its base!
- Replacing front, side, and back grilles without disconnecting wires in between them (just remove 2-3 bolts for each grate).
- Exiting the grill.
- Turn off the power, remove the grease trap and fill it with soapy water for about 20 minutes (can also be done with a garden hose). Re-install to grill, connect the grill to power and reopen the grill.
- Put the oil tray back on, then reinstall all side grills, then close and lock the lid (or close the lid and reconnected its power).
How to easily clean grease trap on Traeger ironwood 650?
- Open the grill and disconnect the heating unit from the base.
- Gently pull out the grease trap, but don’t disconnect the tube. Put a little bit of liquid soap in a bucket and put it next to your grill cleaning tool and a garden hose (to let flow). Fill the swivel bucket with soapy water. Place the funnel in the hose p/nˆ8, turn it on and start to clean; push down on it gently to remove all gunk that can be removed.
- Spray some soap in the grease trap. Let it sit for 20 minutes or so, depending on how bad it is. If there is no water coming out of the grill, replace it with a hose attached to your faucet and let it run until all the soap is out and clean.
- Another way is to just spray some liquid soap inside and let it run for a few minutes (no need to fill up the whole grease trap). After 10-15 minutes you will notice that the soap is out to turn off the water supply and remove the hose.
- Gently clean all of the gunk with a spoon or similar kitchen cleaning tool, then put it back in place and connect it to the grill. Do not forget to reconnect the heating unit to its base!
- Replacing front, side, and back grilles without disconnecting wires in between them.
- Exiting the grill.
- Turn off the power, remove the grease trap and fill it with soapy water for about 20 minutes (can also be done with a garden hose). Re-install to grill, connect the grill to power and reopen the grill.
- Put the oil tray back on, then reinstall all side grills, then close and lock the lid (or close the lid and reconnected its power).
Another post: How to clean a kerosene can? Best Step by Step Described for 2022
Which place is the grease trap on a Traeger ironwood 650?
It is located on the left side of the grill right next to the control panel. It is a little round thing with a hose coming out of it.
Where is the grease trap on a Traeger model 570?
To find it, first, open the top lid. Then you will see 4 knobs: smoke, temp, dark, and light. Turn them to “off” (lowest setting) and push one knob in each time to remove the top lid. Then you will see the grease trap on the left side.
Where is the grease trap on a Traeger model 580?
Remove the metal cover plates that are located on both sides of your grill. Then look down below these metal plates and you will find a rectangular-shaped metal plate. Gently pull it up and out to reveal the grease trap. This metal plate can be very stubborn, so make sure to pull it straight up and out, not at an angle.

How to clean Traeger grease trap liner?
- Open the grill and disconnect the heating unit from the base.
- Gently pull out the grease trap, but don’t disconnect the tube. Put a little bit of liquid soap in a bucket and put it next to your grill cleaning tool and a garden hose (to let flow). Fill the swivel bucket with soapy water.
- Place the funnel on the hose p/nˆ8, turn it on and start to clean; push down on it gently to remove all gunk that can be removed.
- Spray some soap in the grease trap. Let it sit for 20 minutes or so, depending on how bad it is. If there is no water coming out of the grill, replace it with a hose attached to your faucet and let it run until all the soap is out and clean.
Frequently asked some questions about how to clean grease trap on Traeger
What is the grease trap on a Traeger grill?
The grease trap on a Traeger grill is located on the back right side of the grill. To clean it, you need to turn off the power, remove the grease trap and fill it with soapy water for about 20 minutes (can also be done with a garden hose). Re-install to grill and reconnect your heating unit to its base. Then reopen and lock your grill.
How do you clean the grease trap on a Traeger Timberline?
To clean the grease trap on a Traeger Timberline, you need to open the top lid, turn off the power, remove the grease trap and fill it with soapy water for about 20 minutes (can also be done with a garden hose). Turn off the power, remove the soap and reinstall to grill. Then reopen and lock your grill.
Another post: How to clean Cuisinart electric kettle? The best guide for 2022
How do I clean my grease trap grill?
To clean your grill, you will need to turn off the power, pull the grease trap out and fill it with soapy water for about 20 minutes (can also be done with a garden hose). After 20 minutes you will notice that the soap is out. Remove the hose and proceed to clean all of the gunk with a spoon or similar kitchen cleaning tool. Put it back in place and connect it to the grill.
How do I clean the grease trap on my Traeger 575?
If you refer to the images and the video above, you need to remove the top lid. On the left side of your grill, you will find a red switch, turn it off and then remove other metal covers.
The grease trap is at the back right side of your grill, and it is a rectangular-shaped metal plate. Gently pull it up and out to reveal the grease trap and clean it with soapy water for about 20 minutes (can also be done with a garden hose).
After 20 minutes you will notice that the soap is out. Remove the hose and proceed to clean all of the gunk with a spoon or similar kitchen cleaning tool. Put it back in place and connect it to the grill.
video credit: Ronald Lvovski
Conclusion of how to clean grease trap on traeger:
You might also want to look at your grill’s grease trap. It doesn’t need to be cleaned every time you use your grill, but if the grease is starting to solidify or there are ingredients stuck to it, then you want to clean it out.
You can do this by heating an oven to 350 degrees and allowing the grill grate to sit on the hot oven rack for 10-15 minutes. Afterward, the hot temperature should loosen any gunk that’s stuck in the trap, making it easier to remove with a spray bottle and a brush.