How to clean a ceramic bong

How to clean a ceramic bong? Easy 10 steps described (2022)

Do you know how to clean a ceramic bong? Taking care of your bong is very important in order to get the best experience possible and not ruin anything. A dirty ceramic bong can lead to bad hits and overall a bad time.

Most weed smokers are aware that glass bongs are great for keeping your weed fresh. The sticky resin can ruin the taste. This is why bongs are a popular choice for many cannabis users. However, your weedy bong does not stay clean forever and requires cleaning. In order to learn how to clean a ceramic bong, consider the following information and tips.

What can I use to clean my bong besides rubbing alcohol
What can I use to clean my bong besides rubbing alcohol

Why need to clean a ceramic bong?

For the most part, bongs are made from a single piece of ceramic and glass. This is why they are popular for their durability. Most of the time, you will see them in glass cases. However, there are some people that choose to keep their weed burning in their bong suspended above the ashtray.

For this reason, your weed smoker needs to know how to clean a ceramic bong in order to protect his investment. It is important to consider what kind of bong you own. This may come in handy when knowing how to clean it.

What is needed to clean a ceramic bong?

Your bong is made up of several parts. You will notice that the joints, downstream, and bowl have a particular part to play in the smoking experience. For this reason, you can expect that it is important to clean all these parts thoroughly in order to increase the longevity of your bong.

Begin by removing the stems from your bong and cleaning them with soap and water. This will remove any leftover resin or residue on them.

If you use a rubber grommet, it is important to clean this thoroughly. Because the grommet acts as a seal, you want to make sure that no bacteria or mold grows in your bong.

Once this is done, it is time for the main part of cleaning your ceramic bong. First, remove the wax and ice catcher from the bong. This can be done with ease by using your fingers to pull them off.

You will notice that the bowl is the most important part of your bong. You can use a pipe brush to clean this part. Also, dip this cleaning tool in alcohol. This will prevent it from rusting and keep it free from mold.

Once you have removed the bowl, clean the downstream with a pipe cleaner and alcohol. Again, run the pipe cleaner through alcohol dipped for cleaning purposes.

Clean the bowl with a mixture of salt and water. You will know that the bowl is clean when you see no residue left behind on it.

If you have a nail attached to your bong, you will want to soak this in a bowl of rubbing alcohol. This will prevent any bacteria growth on your bong.

It is also important to clean the base of your bong with rubbing alcohol and cotton swabs. This will remove any residue or leftover wax that may ruin your smoking session.

To polish the exterior of your bong, you will want to use a dry cloth to wipe off any dust or debris left behind from cleaning.

Finally, rinse it all under warm water, and wipe it down with rubbing alcohol. You can then place your bong back together and enjoy smoking once again.

How to get bong water smell out of carpet
How to get bong water smell out of carpet

What Are the Best ceramic Bong Cleaning Products?

If you want to clean your glass bong effectively, you want to know that there are some products that are better than others. In order to clean your ceramic bong well, the best products are the following:

Hot water and soap

This is an excellent cleaning method for any smoker. It can be used on glass or porcelains bongs without fail. You may need to repeat the process in order to get a cleaner bowl. However, this method will not damage anything and only make it look new again. You may consider using a pipe cleaner or cotton swabs as you clean your bong.

This method works very efficiently on the bowl and downstream. It is also going to be made easier because the cleaning process is a bit different with this method. First of all, you are going to want to fill the bottom portion of your bong up with warm water. Then add in some quality soap and use your fingers to mix them up.

One thing you will not want to do is put too much soap into your bong. This will make it hard to clean, and you will have to rinse everything several times. Instead, only add a little. The hot water is going to help remove any residue from the bowl and downstream.

To increase the efficiency of this cleaning method, you can use a pipe cleaner or Q-tips for cleaning the bowl. You can also use a pipe brush for the downstream as well.

When finished, drain out the water with your bong under warm water. You may want to repeat the cleaning process to get the best results possible. You can use a pipe cleaner or Q-tip for this as well.

Vodka and Glycerin

This method is going to work even better than hot water and soap because it can get into all the nooks and crannies of your bong. However, you will need an alcohol-based substance for this cleaning method.

You will notice that vodka removes stubborn residue perfectly, especially on a bong bowl. This is an excellent cleaner for any type of bong. To make it even better, you can use glycerin to remove any stubborn residue. Glycerin is great for this purpose because it can penetrate deep into the cracks and crevices of your bong.

In order to make this mixture, you will want to mix equal amounts of vodka and glycerin together in a plastic bowl or bottle. After that, put some cotton balls into the solution and allow them to soak up all the solution.

Do not put too much into your bong. It is better to dilute it a bit than to have it go overboard.

When using this mixture on your bong, shake the bong a few times and then allow the cotton to soak up all of the solutions. Then drain out excess water with warm water and wipe down properly with a wiping tissue.

Lemon and Salt

If you want to clean your bong very well, you may want to mix lemon juice and salt together for use in your disposal method.

This is the perfect mixture for removing any stubborn residue from your bong. The lemon juice is going to lighten everything up a bit, and the salt will help dry it out.

You will notice that this mixture is quite effective on your bowl and downstream, especially on those that are glass. The acid in the lemon juice works very well in removing residue left behind by smoking. Before you use this method, you will want to add some salt and water to a cup of warm water.

Use your fingers to mix it all up and then pour it into your bong. Then you will use a pipe cleaner with some alcohol for cleaning purposes. You will want to clean the bowl thoroughly before it dries out, and you can also use a pipe cleaner for the downstream as well.

When finished, pour out the solution with warm water and wipe down properly with a wiping tissue or paper towel.

Olive Oil and Vinegar

Another excellent method for cleaning your bong is using olive oil and vinegar in the cleaning process. You should not have any trouble with this method as it is going to clean very well.

First, pour some olive oil into your bowl, and then add some vinegar. You may need to mix these ingredients properly and make sure they are both of equal proportions in the mixture.

Once you have everything mixed up properly, you can add some cotton balls into the mixture. You will then want to add a few drops of alcohol for cleaning purposes as well. It is going to be very important that all of the residues is gone from your bong before you use this method.

You will also need a pipe cleaner or Q-tip for cleaning purposes as well.

When finished, drain out the solution with warm water and wipe down your bong properly with a wiping tissue or paper towel.

Isopropyl Alcohol

You may want to use alcohol as the main ingredient in your cleaning solution. It is going to be quite effective in removing stubborn residue. You can use any brand of isopropyl alcohol and you can choose to add a little bit of water if wanted.

You will also need some cotton balls, pipe cleaners, and a Q-tip for this method as well. Make sure that your bong is dry before you use this method on it. For this method, you will need to pour some alcohol into your bong and allow it to sit for a while.

This is going to loosen up the residue and allow the cotton ball, pipe cleaner, or Q-tip to absorb it. While you are waiting for this process to take place, make sure that you swirl your bong around as this will help mix everything together properly.

When you think it is ready, remove the cotton ball and pipe cleaner and then drain out the solution with warm water. You will then want to wipe down your bong with a paper towel or tissue and allow it to dry properly.

How to unstick a bong stem
How to unstick a bong stem

Warm Water

If you are not comfortable using any of the previous cleaning methods, you can go with warm water as your main means of cleaning. It is going to be very effective in removing stubborn residue and will never leave dents on your bong.

To use this method, all you are going to need is some warm water and a pipe cleaner or Q-tip for cleaning purposes as well. You should be able to use warm water without causing damage to your bong, but it can be best if you do not immerse your bong in the water while using this cleaning method.

While using this method, you may want to swirl your bong around several times as this will help with mixing the water and residue. You will also want to make sure that you do not use too much water at once and that it is warm enough. You can test the water with a clean pipe cleaner and if it is too hot, you may want to add more cold water.

Once you have your bong in the warm water, swirl it around until the residue is removed. You will also want to wash down the bong thoroughly with a paper towel or tissue. Then allow your bong to dry once finished.

These are some of the best methods for cleaning your bong, but there are many other cleaning methods that you can use as well.

How to clean a ceramic bong in 10 steps?

Cleaning ceramic bong is not as difficult as we can think.

Step 1: Rinse your pipe under running water.

Step 2: Clean the bowl with a pipe cleaner dipped in a household cleanser and then allow it to dry before filling the bowl with weed and tobacco.

Step 3: Use a good pipe cleaner dipped in rubbing alcohol to clean the downstream section. Step 4: Use some rubbing alcohol and a paper towel to clean the mouthpiece. Keep it soaked for several minutes first before cleaning it with a paper towel.

Step 5: You can also use rubbing alcohol and cotton balls to clean your bong. Dip the cotton ball in alcohol and squeeze out the excess liquid.

Step 6: Clean the outside of your pipe with rubbing alcohol using a cotton ball or pipe cleaner for an effective result.

Step 7: If you have several pipes, you can put them in a dishwasher. Wash them all together and then allow them to dry.

Step 8: You can also use paper towels to wipe down the surface of your bong for an effective result.

Step 9: For an effective result, use alcohol and cotton balls to clean your bong thoroughly.

Step 10: Once you have finished cleaning your pipe, dry it off with a paper towel or tissue.

Watch the video: How to make a ceramic bong.

Video credit: The Clay Collective Channel.

How do you clean an expensive bong in an easy way
How do you clean an expensive bong in an easy way

How do you clean an expensive bong in an easy way?

If you own an expensive bong and you are concerned about the cleaning process, do not worry because below here I’m going to give you a simple step.

Now, before trying to clean your bong there are a few things you should know first. If your bong is made up of smooth glass then just ignore this procedure as it will cause more damage than benefit.

You must be careful while washing any kind of glass materials because they can get broken in the whole process. While cleaning a bong it is always good to use a brush-like pipe cleaner for the bong as using anything else will leave scratches.

If you are looking for an easy way to clean your bong then you can use rubbing alcohol, a fine scrubbing pad, and dish soap. First of all, you have to put some water into it and allow it to soak because any other substance is not effective in cleaning a bong.

You can fill the water into the bong up to half the bowl which will allow sufficient room for swirling. While the bong is in water, it is good to run hot water through it because the hot water will help in loosening any kind of residue particles.

Then use a clean pipe cleaner or a toothbrush to dip some rubbing alcohol into it and start scrubbing your bong. Make sure that you rub each area for at least 5 minutes which will ensure that the surface of your bong is properly cleaned.

What kind of household items can you use to clean your bong?

Cleaning a bong is not as easy a process as it may seem.

There are many methods used by people to clean glass bongs, but they do not always work so here are some household items that you can use to clean your bong.

Chlorine bleach has been recommended by many people because it is a fine glass cleaner. It can be used for cleaning a glass wand and even for the pipe body if it is made out of acrylic or glass.

All you have to do is to fill a sink with some bleach and hot water, soak the bong and then use a pipe cleaner.

Chlorine bleach can damage your bong if it comes in contact with glass, so make sure that you wear gloves when using this cleaning product.

Rubbing alcohol is also another item that can be used for cleaning glass objects, but it does not work on acrylic parts. You can obtain this cleaning product easily by just going to a local drugstore or even an online pharmacy.

Another item that can be used in cleaning your bong is a pipe cleaner. This is also a useful item that you can use to clean your crystal bowl without any purpose of leaving scratches or dents on it. For this, all you have to do is take out the bong and soak it in some hot water along with the pipe cleaner.

How do you clean a bong without vinegar?

Cleaning your bong with vinegar is one of the most common methods used by most people to clean their bongs.

If you are wondering how to clean a bong without vinegar then you will be glad to know that there are several ways that you can do this.

First of all, you will have to take out your bong and soak it in some warm water along with some white vinegar. Then scrub the inside of your pipe using a pipe cleaner or even a toothbrush. There are many people who have used the toothbrush to clean their bong because it is very effective.

Another method that you can use in cleaning your bong without vinegar is to fill some ice cubes in a bowl and then drop some rubbing alcohol over it. Place your bong into the mixture and allow it to soak for a while.

Then use your pipe cleaner or a toothbrush to scrub the inside of your bowl. After this, you can remove your bong and wash it off with plain water.

Frequently asked questions about how to clean a ceramic bong.

How do I clean a ceramic bong?

  1. Fill the bong with warm water.
  2. Then add some salt to the water.
  3. Plug the top of the bong with your thumb.
  4. Then shake the bong vigorously for 1 minute.
  5. Empty out the water and salt mixture from the bong.
  6. Finally, rinse the bong thoroughly with clean water.

What can I use to clean my bong besides rubbing alcohol?

Soak the dirty bong in a sink or tub full of hot water for about 15 minutes to loosen the residue. Remove the bowl piece, and add baking soda and salt to the bottle filled with rubbing alcohol.

Shake vigorously to clean the inside of the bong. Rinse out the main chamber with hot water when finished.

How do you clean a Lookah bong
How do you clean a Lookah bong

How do you clean a Lookah bong?

Lookah bongs are handmade pieces, which makes cleaning a bit more difficult. We recommend using a pipe cleaner and rubbing alcohol to clean the inside the pipe, then use warm water to thoroughly rinse the pipes out.

Step 1: Soak your Hookah bong in warm water for about 30-45 minutes.

Step 2: Remove the bowl piece from your Hookah bong and add 100 ml of isopropyl alcohol to it.

Step 3: Shake vigorously for about 10 minutes. The glass will be coated in rubbing alcohol, so DON’T use a pipe cleaner to clean it. Instead, let the alcohol evaporate for about 2 hours.

Step 4: Rinse the inside of the bowl piece with hot water, then re-assemble it and clean the outside with warm or hot water.

How do you clean a complex bong?

Cleaning a complex bong is not as easy as cleaning other bongs because the joints are much smaller. Here are some cleaning methods that you can use to clean a complex bong.

If you have any kind of solution in which you have dissolved some salt, then it will be very helpful for your bong. All you have to do is to soak your bong in this solution for about 30 minutes and then use a brush to clean the inside of your bowl piece.

Conclusion:

Ceramic bongs are the safest bongs there are. It will last longer and will be easy to clean. Bongs made of glass can get broken accidentally, but ceramic bongs are much harder to break. That’s why I prefer using ceramic bongs rather than glass ones.

The Homy

TheHomy.com provides you the vital information on How To related questions, Cleaning, Removing guides, and so on as well as tools for managing your household and gives you cleaning and maintenance questions. You can trust our cleaning guides are well-researched and credible. TheHomy.com is one of the most trustable sites on Google.

View all posts by The Homy →

Leave a Reply

Your email address will not be published. Required fields are marked *